General Vibration

Dytran Instruments produce a range of quartz and ceramic piezoelectric accelerometers, offered mainly with integral IEPE electronics, to simplify connection and eliminate cable noise problems, or as ‘charge mode’ with no internal electronics, for high temperature use with external charge amplifiers. TEDS is optionally available across many of the range, and we can supply mating cables, mounting accessories, IEPE power sources and charge amplifiers to compliment any of the range

General Purpose

SERIES DESCRIPTION RANGE F.S.

(g)
3049 Low profile, various mounts, with top connector 50 – 500
3055/56 General purpose, stud mount, 10-32 side/top connector, isolated 10 – 500
3255/56 General purpose, lower cost, stud mount, 10-32 side/top connector 10 – 500
3100 High sensitivity, stud mount with side 10-32 connector 5
3220/11 Through-hole mount with side 10-32 connector 50 – 500
3214/34 Modal cube design, stud mount with side 10-32 connector 10 – 500

Miniature

SERIES DESCRIPTION RANGE F.S.

(g)
3030 For ESS applications, stud mount with top 10-32 connector 500
3032 Miniature adhesive mount with integral cable 500 -1000
3035 Adhesive or mounts with side 5-44 connector 50 – 500
3097 Cube design, stud mount with side 10-32 connector 10 – 500
3145 Adhesive or stud mount, with top 5-44 connector 50 – 1000
3220/3311 Centre through hole mount with side 5-44 connector 500/100
3224 Ultra-miniature teardrop type, adhesive mount with integral cable 500 -2500
3225 Miniature teardrop type, adhesive mount with integral cable 500
3274 Miniature teardrop, isolated adhesive mount with integral cable 200 – 1000
3305 Flat square design, adhesive mount with 10-32 side connector 10 – 500

Triaxial

SERIES DESCRIPTION RANGE F.S.

(g)
3023 Miniature cube, adhesive or stud mount with side 4-pin connector 500 – 5000
3033 Miniature through hole mount with integral cable 500
3053 Flat square design, adhesive or stud mount, special 4-pin conn. 500 – 1000
3093 Cube design, stud mount, isolated, with special 4-pin connector 50 – 1000
3133 Sub-miniature cube, adhesive mount with integral cable 500 – 5000
3143 Low profile centre hole mount with side 4-pin connector 50 – 500
3233 High sensitivity, through hole octagonal, side 4-pin connector 5
3263 Cube design, stud mount with side 4-pin connector 50 – 500
3273 Miniature cube low noise, adhesive mount, side 4-pin connector 50 – 500
3293 High sensitivity square design, stud mount, side 4-pin connector 7
3313 Miniature cube low noise, stud mount, side 4-pin connector 500 – 5000
3333 Miniature cube low noise, adhesive mount, mini 4-pin connector 50 – 500
3343 Miniature flat square, adhesive mount, mini 4-pin connector 500 – 2500
3413 Cube design, adhesive mount, isolated, mini 4-pin conn., TEDS 100 – 1000
5313 Triaxial seat pad with integral cable 50

High Temperature (charge output)

SERIES DESCRIPTION SENSITIVITY

(pC/g)
3030C For ESS application, stud mount with top 10-32 connector 0.4
3035C Miniature stud mount with side 5-44 connector 2.5
3049D Low profile, stud mount with 10-32 top connector 5
3055/56C General purpose, stud mount, 10-32 side/top connector, isolated 15
3255/56C General purpose, lower cost, stud mount, 10-32 side/top connector 15
3085/3235C Differential, 3x bolt mount, side 2-pin connector 10/50
3088C High sensitivity, stud mount with side 10-32 connector 10
3092C To 482degC, stud mount with side 10-32 connector 3.5
3196/7C Rugged, 3x bolt mount, side TNC connector 8/2-4
3218C To 482degC, 3x bolt mount, integral hard-line cable 1.6
3220C/C1 Through hole mount, side 5-44 connector 1.5/10
3224C Ultra-Miniature teardrop design, adhesive mount, integral cable 2-4
3225E Miniature teardrop design, adhesive mount with integral cable 1.8
3316 Up to 538degC miniature cube design, various mounts, 10-32 conn 1-2
3443C Triaxial, 2x bolt mount, 3 side 10-32 connectors 2.7
5334/5 To 482degC, 3x bolt mount integrated diff. amp with voltage output 10mV/g

Special Sensors

SERIES DESCRIPTION RANGE F.S.

(g)
3062 Airborne range, stud mount with 3-pin rugged connector 200 – 500
3077/8/9 Airborne bracket style mount with integral cable 500
3091 Airborne bracket style mount with 3-pin connector 500
3168/3236 Airborne through hole mount with integral cable/3-pin connector 500
3232/3302 Airborne biaxial, bracket mount with 3-pin connector 500
3191/2 Seismic level sensors, stud mount with rugged connector 0.5 – 5
3200 Shock sensors with or without integral cable to 70,000
3120/3 Back to back reference standard 500/50
5860 Impedance head, combined force & accelerometer 50lbf/50g
7705 Dual element design from 0 to 10kHz, stud mount, side 4-pin conn. 20 – 200

Dytran Instruments