Piezo Electric Signal Conditioners and Accessories

Signal conditioning for powering IEPE and charge mode transducers with built in, attached, or in-line amplifiers, and for coupling them to instruments – models with battery or line power, with or without gain are available in single and multi-channel configurations. Mounting accessories and cable assemblies are also supplied. A selection is listed here, however many more cables and accessories are available so please contact us if you have a specific requirement. We hold the most common accessories in UK stock for fast delivery and these are also available to purchase via our online store.

Signal Conditioning for Piezoelectric Sensors

SERIES DESCRIPTION
4102C Single channel battery supply with x1 gain and BNC connectors
4103C Three channel battery supply with x1 gain and BNC connectors
4105C Single channel battery supply with x1, x10 or x100 gain and BNC connectors
4007 Four channel IEPE conditioning board, AC/RMS output and filters
4705 General purpose in-line charge amplifier, BNC connectors and filter
4751 General purpose in-line charge amplifier, 10-32 connectors
4752/54 In-line charge amplifier for high temperature sensors, 10-32 connectors
4753 In-line charge amplifier for high temperature sensors, 10-32 input, BNC output
FE-MM-376 Multi-channel modular system, dual channel IEPE boards
FE-PE-530 Modular system with front panel set-up, single channel boards
FE-128-CA Multi-channel modular charge amplifier system
FE-074 In-line charge amplifiers, BNC connectors
HS-500 Series of modular IEPE electronic modules for DIN rail mounting
HS-620/630 Hand held vibration meter/+ temperature kit
TPI 9070/80 Hand held vibration monitor with bearing damage/FFT functions
4400 Miniature self-contained triaxial vibration logging system
IEPE-Link Wireless node for burst data, for use with LORD wireless systems

Cables for Piezoelectric Sensors

SERIES DESCRIPTION
6010 10-32 to 10-32 connectors, white Teflon jacket coaxial cable
6011 10-32 to BNC connectors, white Teflon jacket coaxial cable
6013 10-32 to 10-32 connectors, red low noise Teflon jacket coaxial cable
6019 10-32 to BNC connectors, red low noise Teflon jacket coaxial cable
6014 5-44 to 10-32 connectors, grey flexible PVC jacket coaxial cable
6040 5-44 to BNC connectors, grey flexible PVC jacket coaxial cable
6025 5-44 to 10-32 connectors, red low noise Teflon jacket coaxial cable
6056 5-44 to BNC connectors, red low noise Teflon jacket coaxial cable
6048 BNC to BNC connectors, red low noise Teflon jacket coaxial cable
6020 BNC to BNC connectors, black PVC jacket RG-58 coaxial cable
6055 BNC to BNC connectors, white Teflon jacket coaxial cable
6426 BNC to BNC connectors, black polyurethane jacket coaxial cable
6082 2-pin to BNC connectors, black polyurethane jacket, 2-wire twisted
6430 Special 4-pin connector to 3xBNC, black Teflon jacket for triaxial sensor
6801 Special 4-pin connector to 3xBNC, flexible PVC jacket for triaxial sensor
6811 4-pin to BNC connectors, black Teflon jacket for triaxial sensor
6824 4-pin to BNC connectors, flexible Santoprene jacket for triaxial sensor
6979 Hard-line cable for high temperature accelerometers, insulated

Accessories for Piezoelectric Accelerometers

SERIES DESCRIPTION
6273 Petro mounting wax, 20grams in plastic box
6167 Adhesive mounting base, 3/8” hex with 2-56 mounting thread
6207 Adhesive mounting base, 3/8” hex with 5-40 mounting thread
6213 Adhesive mounting base, 5/8” hex with integral 10-32 mounting stud
6221 Adhesive mounting base, 5/8” hex with 10-32 mounting thread
6228 Adhesive mounting base, ½” hex with 10-32 mounting thread
6222 Insulated mounting base, 3/8” hex with 5-40 mounting thread
6226 Insulated mounting base, 5/8” hex with 10-32 mounting thread
6243 Insulated mounting base, 3/8” hex with 10-32 mounting thread
6245 Insulated mounting base, 5/8” hex with 10-32 mounting thread
6268 Insulated mounting base, 5/16” hex with 5-40 mounting thread
6196 Magnetic mounting base ¾” hex with 10-32 integral stud
6199 Magnetic mounting base, 3/8” hex. with 2-56 thread, high pull
6209 Magnetic mounting base, 1” diameter with 10-32 mounting thread
6258 Magnetic mounting base, 5/8” hex with 10-32 integral stud, high pull
6265 Magnetic mounting base, 3/8” hex with 5-40 thread, high pull
6272 Magnetic mounting base, 5/8” hex with 10-32 thread, high pull
6166 Thread adapter, 10-32 external to 2-56 internal threads
6205 Thread adapter, 10-32 external to 5-40 internal threads
6176 Mounting stud ¼-28 to ¼-28 threads, S/S
6200 (S) Mounting stud 10-32 to 10-32 threads, BeCu (S/S)
6201 Mounting stud ¼-28 to 10-32 threads BeCu
6203 Mounting stud 10-32 to M6 threads, BeCu
6204 Mounting stud ¼-28 to ¼-28 threads, BeCu
6205 Mounting stud 5-40 to 10-32 threads, BeCu
6580 Mounting stud 5-40 to 5-40 threads, BeCu
6240 (S) Triaxial mounting block 1” cube, 3x 10-32 threads, Al (S/S)
6241 Triaxial mounting block ¾” cube, 3x 10-32 threads, Al
6269 Triaxial mounting block 3/8” cube, 3x 5-40 threads, Al